The WING-Tactic was designed with and for the GIGN with very high performance and controlled weight in mind.
This knife has the best total length/weight/solidity balance of its knid of world.
Kraton handle for easy use even with a glove.
2 strap holes allow to add a safety lace.
2 holes allow to add an elastic lanyard
Ultra-efficient window-breaker with grey blade or strike pommel with satin blade.
As option: Patented wire-cutters
- To cut steel wire up to 2.5mm diameter.
- can be used as a saw by locking a tig saw blade at the opposite side of cutting tool.
- can be used as an auger. In this case, one MUST USE the BLADE PROTECTION to prevent serious injury.
5 configurations for the "Special Forces" sheath:
1- Special Forces sheath included with the knife
This sheath allows any wearing position for civil or military use and with a very efficient retention system.
The base sheath consists of:
- 1 ambidextrous rigid sheath in Polymers
- 1 belt strap screwed on the rigid sheath. (vertical wearing)
- 1 leg strap
- 2 SF sheath with pouch
2 small straps allow to adapt the pouch to the base sheath.
Vertical wearing with pouch
Horizontal wearing using the 2 straps (without the pouch) SF sheath with pouch
3- Kit FS MOLLE enables the SF sheath to be fixed to MOLLE.
This is made up of a clip buckle and a nylon loop to seat the sheath on the jacket or bag as well as a screw and an elastic lanyard securing the hold of the knife in the sheath.
As option with the models without GIGN logo
Included with the models with GIGN logo
4- "Special Forces" sheath Helico version
Same rigid sheath with two straps for calf wearing. The upper one with a neopren loop reinforced with Kevlar.
5- "Special Forces" sheath Diving version
Same asabove, but lower strap in rubber to get better grip on the wet suit.
- the GIGN Model:
WING-Tactic knife with GIGN logo, window-breaker and grey blade.
Delivery with the SF MOLLE Kit and 2 straps for horizontal wearing.
Delivery into a gift box
- The models without GIGN logo
Tactical version: window-breaker pommel and grey blade
Survival version: strike pommel and satin blade
Grey blade (window-breaker pommel)
Grey blade with combo edge (window-breaker pommel)
Satin blade (strike pommel)
As option: a gift case.
Perfect to present the knife and do a gift.
Hole for manual lock.
Included with the GIGN model
As option: a luxourious case ideal giftbox.
Blue velvet inside.
Extractor Stainless steel Length: 23/4 inch Weight: 0.776 Oz
Steel Length: 43/4 inch Weight: 3.245 Oz Sold with blade protection (except for TX Bowie model)
68 mm 140 mm when open Diamond Fine grain
Multiposition clip Strap Elastic lanyard 2 screws Allen key
A partir de
4 sizes in ABS or Polypropylen
A partir de
Sheath for Wild Tech4 Sheath for Wild Tech4 XL Kraken sheath Inside Kydex sheath for 3CK SAS Dagger sheath Blade-H4 sheath Special Forces for Wing-Tactic Special Forces for with pouch Special Forces Helico Special Forces diving
2 mini straps
Fixed blade 8.86". 4.33" blade Stainless steel N690Co Blade thickness: 0.196" Hardness: 56-57 HRC Weight: 6.878 oz /9.70 Oz with sheath Coated : Black Epoxy powder Paracord handle Delivered with POM sheath
A partir de
Throwing knife 9.685". Blade length 4.33". Stainless steel X46Cr13 Blade thickness: 5 mm Hardness: 54 HRC Weight: 5.644 Oz set of 3 knives
A partir de
Fixed blade 10.63". 5.31" blade Stainless steel N690Co Blade thickness: 0.18" Hardness: 58-59 HRC Weight: 6.63 oz Coated : Black Epoxy powder Tactipren handle Delivered with Pom and Nylon sheath
Fixed blade 10.63". 5.31" blade Stainless steel N690Co Blade thickness: 0.18" Hardness: 56-57 HRC Weight: 6.63 oz Coated : Black Epoxy powder Tactipren handle Delivered with Pom and Nylon sheath
Question, advice, order +33 18.104.22.168.86
up to 14 days to exchange your articles
European warranty 2 years
30-year guarantee for forged models
Delivery by post
All our transactions are 100% secured
Copyright © Wildsteer - Tous droits reserved